Chicco SYNTHESIS Instrucciones De Uso página 23

2. Never fi t this child car seat into a front seat
equipped with frontal airbag. Fit the child
car seat into the front seat only if the fron-
tal airbag has been deactivated: check with
the car manufacturer, or in the car instruc-
tions manual, whether the airbag can be
deactivated.
If the Synthesis model features the mini
insert:
WARNING! To ensure maximum safety to
your child, never use the mini insert with
children of over 6 Kg of weight.
• The child car seat has a mini insert to en-
sure maximum protection and comfort to
children from birth up to 6 Kg of weight.
Before fi tting the mini insert, check that
the safety harness is inserted into the low-
est hole: this is the only position allowed
for using the child car seat with this acces-
sory.
CAR SEAT AND SAFETY BELT
REQUIREMENTS
The child car seat may be fi tted to the front
passenger seat or any rear seat, but with the
following restrictions. The child car seat must:
- be fi tted in a front-facing position (diag.1)
- be fi tted with a 3-point static or 3-point re-
tractor safety belt (diag.2A).
CAUTION! Never fi t the child car seat into a
car seat if it is only equipped with a lap belt
(diag. 2B).
HOW TO ADJUST THE SAFETY HARNESS
WARNING! The safety harness must always be
adjusted to the size of the child's body.
Before fi tting the child car seat into the car, it
is necessary to adjust the height of the child's
safety harness.
The correct position of safety harness is
slightly below the child's shoulders (diag. 3).
The height can be adjusted to 3 positions
(diag. 4).
If the Synthesis model features a mini insert:
Before fi tting the mini insert, check that the
belts are inserted into the hole located in the
lowest position: this is the only position al-
lowed for using this accessory.
INSTRUCTIONS
Components
A. Fabric cover
B. Storage drawer
C. Sun canopy
D. Diagonal safety belt's side guides
E. Adjustment belt
F. Button for adjusting the safety harness
G. Safety harness' holes
H. Handle
I. Handle adjustment buttons
J. Button for locking/unlocking the child car
seat from the stroller
K. CLIK CLAK system knob
L. Diagonal safety belt's guide
M. Sun canopy hooks
N. Mini insert
O. Triple padding (two shoulder straps and
crotch strap)
P. Safety belts
Q. Safety harness straps
R. Safety belt's buckle
S. Button for opening the buckle
WARNING! The child car seat comes in differ-
ent versions: They may or may not feature tri-
ple padding, storage drawer, mini insert or side
protection, depending on the country of use.
Index
• How to adjust the height of the safety har-
ness
• How to fi t the child car seat into the car
• How to place the child into the child car
seat
• How to adjust the handle
• Child car seat in the bouncing or baby chair
position
• How to remove the fabric cover
• How to fi t the child car seat to the stroller
HOW TO ADJUST THE HEIGHT OF THE
SAFETY HARNESS
1. Unfasten the safety harness, pressing the
red button located on the buckle (diag. 5).
2. If present, open the storage drawer located
at the rear (diag. 6), and remove the two
23