Maintenance Chart - RedMax SGCZ2401S Manual De Instrucciones

Ocultar thumbs Ver también para SGCZ2401S:
Tabla de contenido

Publicidad

9. Maintenance
Maintenance, replacement, or repair of the emission control
device and systems may be performed by any non-road engine
repair establishment or individual.

■ MAINTENANCE CHART

system/compornent
fuel leaks, fuel spillage
fuel tank, air filter, fuel filter
idle adjusting screw
spark plug
cylinder fins, intake air cooling vent
muffler, spark arrester, cylinder exhaust port clean
throttle lever, ignition switch
cutting parts
debris guard
gear case
screws/nuts/bolts
36
procedure
before hours
use
wipe out
inspect/clean
see ■ADJUSTING
IDLING SPEED (p.30)
clean and readjust
plug gap
clean
check operation
replace if
something's wrong
make sure to attach
grease
tighten/replace
every
every
every
25
50
100
hours
hours
note
after
after
after
replace, if necessary
replace carburetor
if necessary
GAP: .025in(0.6~0.7mm)
replace, if necessary
not adjusting screws
English

Publicidad

Tabla de contenido
loading

Tabla de contenido