Maintenance; Warranty - SPARKY P 282 Instrucciones De Uso

1. Depending on which side of the planer you wish the
flow either to the left or to the right of the workpiece.
4. A workshop dust extraction system or a household
the efficient removal of dust and shavings permitting a
safer and cleaner working environment.
WARNING: Always ensure that the tool is
switched off and unplugged from the power supply
before making adjustments, installing or removing
blades.
1. To replace the drive belt first take out the three cross-
the left-hand side of the planer as viewed from the
2. Remove the damaged belt and use a soft brush to
clean the pulleys and the surrounding area.
Wear eye protection when cleaning out the pul-
ley area.
leys. Place the new belt over the bottom pulley. Half fit
the other end of the belt on the top pulley then roll the
belt in place whilst turning the pulley.
4. Check that the belt runs evenly by manually turning
the belt.
5. Replace the cover and the three fixing screws.
6. Plug the machine, switch it on and run the planer for a
minute to make sure that the motor and belt operate
correctly.
ment knob; dust bag; blade spanner.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to per-
form inspection or maintenance.
may vibrate loose over time.
Re-lubricate all moving parts at regular intervals.
When the carbon brushes are worn out, both brushes
must be replaced simultaneously with genuine brushes
8
EN
at SPARKY service centre for warranty and post-war-
ranty service.
If the replacement of the supply cord is necessary, this
-
has to be done by the manufacturer or his agent in order
to avoid a safety hazard.
CLEANING
tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into con-
tact with the tool.
To assure product safety and reliability,
ganisations, always using genuine replacement parts.
-

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
dling will be excluded from the guarantee.
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
-
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
tions without prior notice.
-
-
-
-
P 282