Prior To Initial Operation; Know Your Product; Operation - SPARKY BM 1360CEPlus Instrucciones De Uso

Ocultar thumbs Ver también para BM 1360CEPlus:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
the safety regulations, the assembly instruc-
tions and the operating instructions found in
this Manual. All persons who use and service
the machine have to be acquainted with this
Manual and must be informed about its poten-
tial hazards. Children and frail people must not
use this tool. Children should be supervised
at all times if they are in the area in which the
tool is being used. It is also imperative that
you observe the accident prevention regula-
tions in force in your area. The same applies
for general rules of occupational health and
safety.
changes made to the tool nor for any damage
resulting from such changes.
rainy weather, or in moist environment (after
liquids and gases. The working place should
be well lit.

Know your product

Before using the power tool, familiarize your-
self with all the operating features and safety
requirements.
Use the tool and accessories only for the ap-
plications intended. All other applications are
expressly ruled out.
3. Electronic regulator of rotation speed
4. Lock-on button
5. Cord with plug
6. Mixing paddle
7. Spindle
8. Machine collar
10. Handles
11. Ventilation slots

Operation

This power tool is supplied from single-phase al-
ternating current mains only. It is double insulat-
ed according to EN 60745-1 and IEC 60745 and
can be connected to grounded or not grounded
sockets. This power tool is radio suppressed in
compliance with EMC Directive.
6
EN
This power tool is designed for:
- Operation in industry and household;
- Mixing low-viscosity emulsions and viscous
materials, for example: paints, lacquer, adhe-
sives, mortar, etc.;
- Operation with mixing paddles and acces-
manufacturer.

PRIOR TO INITIAL OPERATION

sponds to the value indicated on the name
plate with technical data of the tool.
The power tool must be connected and dis-
connected to the power supply socket only
is connected to a receptacle while the power
switch is in the ON position, the power tool
will start operating immediately, which could
cause a serious accident.
order. If the replacement of the supply cord is
necessary, this has to be done by the manu-
facturer or his agent in order to avoid a safety
hazard.
for faults, unbalanced paddle and vibrations.
Perform a trial test.
WARNING: Always switch off and un-
plug the power tool prior to any adjustment,
servicing or maintenance or in case of mains
drop-out..
SWITCHING ON - SWITCHING OFF
Brief activation
Continuous use
pressed position lock it by button 4.
release it immediately.
Non-self starting safety (NVR)
In case of mains drop-out (or temporary drop-
is in ON position, the machine should not oper-
ate after supply recovering. To start operating
-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bm2 1360ceplus

Tabla de contenido