General Guidelines - HQ-Power VARNA Manual Del Usuario

•
Install the VDP5001RGBLD5 at a minimal distance of 0.5 m from flammable and explosive objects or
substances.
•
Respect a minimum distance of 0.5 m between the device's light output and any illuminated surface.
•
Keep the air vents free at all times. Never cover the device, nor partially, nor completely.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (±2.5 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Mechanical wear is not covered by warranty.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc. The VDP5001RGBLD5
should only be used indoors (<35°C, <75%RH) with an alternating current of 230 VAC/50 Hz.
•
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives. It is recommended to let the device cool down for ± 15 minutes after every two hours of
operation.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4. Features
•
red-green-blue laser
•
with circle, fan and line creating tunnel effects
•
DMX controlled via 5 channels
•
sound activation and auto control mode
•
high capacity and speed micro processor
•
low noise movement.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 power LED
2 built-in microphone
3 sensitivity knob
4 on/off switch
5 safety key (depending on model)
V. 02 – 17/09/2012
VDP5001RGBLD5
6 power cord input/fuse
7 DMX input
8 DMX output
9 DIP switches
4 ©Velleman nv