Digital Tilting Of X-/Y-Axis (R3) - Hedue Q2 Manual De Uso

Digital tilting of x-/y-axis (R3)

The rotary laser HEDÜ R3 has a digital tilting function.
The desired tilting function can be controlled seperately to
the x- or y-axis.
The maximum tilt for one axis is up to 10%.
Are both axes tilted together at the same time there is a sum
of ca. 13%
This button activates or deactivates the digital Tilt-function.
If the Tilt-function is active, the screen shows the following
symbol:
You can choose a single axis and set up a tilt value by
pressing this button. The chosen axis blinking on screen
with an X or an Y.
You can also finsih the preselection of the values
(neither X nor Y is blinking). The R3 resets both axes to
zero joint position to run-up subsequently to the preselected
tilt-value.
If X or Y are blinking you can adjust the needed percentage
quotation with these two buttons.
20