Descargar Imprimir esta página

Whispbar Fitting Kit Instrucciones De Montaje página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
EN
Fitting Kit
K508W
Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
Remove both pins from each leg. Use
tapered end of spanner located inside left
hand cover to assist.
7

Publicidad

loading

Este manual también es adecuado para:

K508w