tefen MixRite Manual Del Usuario página 6

A MixRite Bypass installation
2.5 (M/h)
including mobile fertilizer solution
tank
Chocking valve
Operating valve
Every stroke of the MixRite moves a predetermined volume of
water with a predetermined volume of liquid additive.
To adjust the volume of the liquid additive in models 2502, 2504,
2512, 2514, 12502, 12504, 12512, 12514, 2512IN, 2514IN,
12512IN, 12514IN:
1. Remove the upper U–latch from the Proportioning Lock Nut.
2. Preset the amount of additives according to the Percentage to
Water Scale that is found on the proportioner.
• Turn the proportioning Adjuster counter clock-wise to increase
the amount of additives.
• Turn the Proportioning Adjuster clock-wise to decrease the
amount of additives.
The marking on the scale indicates the % of additive out of the
total water flowing through the injector.
3. Turn the proportioning Adjuster slightly, until the U-latch holes of
the Proportioning Lock Nut align with the notches in the
proportioner.
4. Push the U-latch into the U-latch holes of Proportioning Lock Nut
until it is firmly in place.
Main Water Pipe
Reservior Tank
Adjusting the MixRite
6