Adjusting The Sound; General Settings - Psm - JVC KW-XG500 Manual De Instrucciones

Adjusting the sound

1
2
Adjust the level.
BAS *
1 (bass)
Adjust the bass.
MID * 1 (mid-range)
Adjust the mid-range frequencies
sound level.
TRE *
1 (treble)
Adjust the treble.
FAD * (fader)
2
Adjust the front and rear speaker
balance.
BAL *
3 (balance)
Adjust the left and right speaker
balance.
LOUD * 1 (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
SUB.W (subwoofer)
Adjust the subwoofer output level.
VOL (volume)
Adjust the volume.
* 1 When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
"USER."
*
2 If you are using a two-speaker system, set the fader
level to "00."
* The adjustment will not affect the subwoofer output.
3
*
4 Depending on the amplifier gain control setting. (See
page 21 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 20 and 21.
1
Enter the PSM settings.
2
Select a PSM item.
–06 to +06
–06 to +06
3
Select or adjust the selected PSM item.
–06 to +06
R06 to F06
4
Repeat steps 2 and 3 to adjust other PSM
L06 to R06
items if necessary.
5
Finish the procedure.
LOUD ON or
LOUD OFF
00 to 08,
initial: 04
00 to 30
(or 50) *
4
Continued on the next page
SETTINGS 19