Other devices may experience interference from even the low
levels of electromagnetic emissions permitted by the above
standards. To determine if the emissions from the Perfecto
causing the interference, turn the Perfecto
interference with the other device(s) stops, then the Perfecto
is causing the interference. In such rare cases, interference
may be reduced or corrected by one of the following
measures:
• Reposition, relocate, or increase the separation
between the equipment.
• Connect the equipment into an outlet on a circuit
different from that to which the other device(s) is
connected.
Part No 1163146
SECTION 1—GENERAL GUIDELINES
9
Off. If the
2
Perfecto
™Series
2
is
2
2