PREPARING ESPRESSO WITH OriginalLine NESPRESSO
Lift the lid of the OriginalLine Nespresso
Nespresso
* capsule inside the filter and then close the lid. Once finished, insert the
®
OriginalLine Nespresso
filter holder.
HOW TO PLACE THE FILTER HOLDER
Position the filter holder underneath the brew head, position handle so that the
handle lines up with the unlocked icon " " on the brew head and fits into the groove.
Then, slowly turn the handle to the right until it lines up with the locked position
(indicated by the icon below).
BREWING ESPRESSO
1.
Make sure the drip guard is in place on the drip tray. Place the drip tray in the unit.
2.
Make sure the control knob is in the off " " position.
3.
Place the cup or two cups (demitasses) under the filter holder or if you prefer,
place a small jar. If you wish to prepare up to 4 cups at a time, you should
use a small jar or regular cup and then pour the espresso into the individual
demitasses. If you will be brewing up to two demitasses at a time, you can place
the two small cups under the filter holder ensuring each one of them is directly
under one of the two outlet spouts located under the filter holder.
4.
Plug the power cord into an electrical outlet and turn the On/Off " / " Switch to the
on " " position. The power indicator light will become solid red while the unit is on.
5.
Turn the Brew/Steam Switch and make sure it is on the brew " " position.
When the brew indicator is solid green, rotate the control knob counter-
clockwise to the brew " " position.This will initiate the brewing process and
espresso will begin to flow in just seconds.
6.
When the cup is filled to the desired level, turn the control knob clockwise to
the off " " position. Using less water will provide a stronger espresso taste.
CAUTION: Do not leave unit unattended while brewing since the brewing
process requires to be manually stopped. This will avoid overflow, spillage and
potential hazards and damages.
7.
Once you have prepared the desired amount of espresso, turn the On/Off
" / " Switch to the off " " position and unplug the unit. Allow the unit to
cool down before removing parts and accessories prior to cleaning.
NOTE: When making espresso using the OriginalLine Nespresso Capsules:
a.
Drain off any remaining water on top of the adaptor into the drip tray.
b.
Let the adapter cool down before you remove the capsule.
* capsule filter. Place the OriginalLine
®
* capsule filter into the OriginalLine Nespresso
®
En glis h-7
* CAPSULE
®
* capsule
®