Rack Dry/Beeper/Anti-Bacterial/Custom Programming - LG DLE5911W Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Part 7
FEATURES AND BENEFITS
9. Rack Dry
The dryer rack is shipped in place in your dryer.
Remove and discard any packing material before
use.
The RACK DRY is designed for use with items that
you do not want to tumble dry, including sweaters
and similar items. The heated dryer rack allows the
heated air inside the dryer to flow in a concentrated
pattern, allowing effective and consistent drying.
Use RACK DRY to select the desired time.
To use the RACK DRY:
• Open dryer door.
• Do not remove the lint screen.
• Place dryer rack over the bottom of the dryer door
opening. Rest the rack on the dryer back ledge.
Push down on the frame front to secure over lint
screen.
• Place wet items on top of the rack. Allow space
around items for air to circulate. The rack does not
move, but the drum will rotate. Make sure items
do not hang over the edges or between rack grill.
• Close the door.
NOTE: Check the lint screen and remove any lint
accumulated from items dried on the rack.
Suggested Items
Temperature
for Rack Drying
Setting
Washable wool items
(block to shape and
lay flat on rack)
Stuffed toys (cotton
or polyester fiber
filling)
Stuffed toys (foam
rubber filled)
Foam rubber pillows
Tennis shoes
* Reset time as needed to complete drying.
2 6
Suggested
Time*
(Minutes)
Low
20
Low/Ultra
20/30
Low
Air Dry/
50/30
Ultra Low
50
Air Dry
Air Dry
20
• Select RACK DRY and MORE TIME or LESS
TIME. Reset time as needed to complete drying.
Refer to the following table.
• Select the desired temperature setting to match the
fabrics in your load by pressing TEMP. CONTROL
(Air Dry-Ultra Low-Low). Items containing foam,
rubber, or plastic must be dried on a clothesline or by
using the Air Dry temperature setting. Refer to the
following table.
• Start the dryer.
10. Beeper
The BEEPER controls the volume of the beep that
is made when you press any of the buttons on the
control panel and the termination of any cycle is
indicated.
Press BEEPER to adjust the sound level or turn off
the signal.
11. Anti Bacterial
This option can only be used with the HEAVY
DUTY, COTTON/TOWELS, and NORMAL cycles.
This option reduces certain types of bacteria. The
ANTI BACTERIAL process produces high
temperature during the cycle.
NOTE: Do not use this cycle on delicate fabrics.
12. Custom Programming
Set up your favorite combination of settings and
save them here for one-touch recall.
To store a CUSTOM PROGRAM.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM pad, then press
START/PAUSE.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido