Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Identification .................................................................. 6
Specifications ................................................................ 6
Operation ....................................................................... 7
Maintenance .................................................................. 8
Troubleshooting ............................................................. 9
Greenlee / A Textron Company
ES1000 Battery-powered Cable Cutter
Description
The Greenlee ES1000 Battery-powered Cutter is
intended to cut up to 1000 kcmil copper and aluminum
cable.
The cable cutter is driven by a 14.4 V motor and is
powered by a rechargeable NiCd (nickel cadmium)
battery. The motor is protected by a circuit breaker.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Textron Inc.
KEEP THIS MANUAL
2
ES100011 Battery-powered Cable Cutter, 120 V
ES100022 Battery-powered Cable Cutter, 220 V
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070