Single Measurement; Continuous Measurement - Nikon PROSTAFF 1000 Manual De Instrucciones

„ Single measurement
„
Pressing the PWR button once starts single measurement, then displays the results.
• If measurement fails, measurement continues automatically for up to about 4 seconds until results are
obtained. Measurement stops when it is successful, even within about 4 seconds.
„ Continuous measurement
„
Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds. During
measurement, the measured result is displayed consecutively while the laser irradiation mark is blinking. If
you release your finger from the button, continuous measurement stops.
Standby
* If measurement fails, measurement continues automatically for up to about 4 seconds until results are
obtained.
Example of measured
distance display
Press the PWR button once
Press and hold down the PWR
button
Example of measurement
failure

Single measurement*

Continuous measurement

En
Es
Fr
De
It
Sv
Nl
Ru
Pl
Fi
No
Dk
Cz
Ro
Hu
17