Operating
Disalay Off
To conserve
energy, the Panel Display turns off automatically
under
the following
conditions:
When no button
has been pressed, when no doors have been
opened, or when no Dispenser
Lever has been pushed for a period
of ti me.
However, the icon indicating
your Water or Cubed / Crushed
selection, stays on.
When you press a button,
open a door, or push a Dispenser
Lever,
the Panel Display turns on again. Except for the Water and Ice
buttons, all function
buttons
will become operational
after you
remove your finger from the button you are currently
pressing.
/_ CAUTION
• If the refrigerator's
water supply
line
is not connected
and water is not
being supplied
to the refrigerator,
the
refrigerator
will make unusual noises if
the ice maker is on or if you push the
water dispenser
lever.
To stop the noises, press the Ice button
until the Ice Off icon lights up (at least
3 seconds) indicating
that the ice maker
is off.
If the water line is connected,
and your
refrigerator
is making unusual noises,
see if the water supply valve on the line
connected
to your refrigerator
is closed,
preventing
water from flowing
into the
refrigerator.
If the valve is closed, open the valve.
Cooling Off Mode
(Demo Mode/Shop
Mode)
_) NOTE
• Cooling Off mode (also called Shop mode
or Demo mode) is designed
for use by
retailers
when they display
refrigerators
on the shop floor.
In Cooling Off mode, the refrigerator's
fan motor and lights work normally,
but
the compressors
do not run, and the
refrigerator
and freezer do not get cold.
• To start Cooling Off mode, Press and hold
the Freezer button,
the Ice button and
the Fridge button for 5 seconds during
normal operation.
The refrigerator
chime sounds and
Animaiton(Freezer/Fridge
Temperature
Indicator
moveing)
appears on the
display.
40
English
DA68-02981N-00.indb
40
2015.3.3.
[qrq9:34