JVC KW-ADV790 Manual De Instrucciones página 51

Menu items
D. Audio Output*
3
Down Mix*
D. (Dynamic) Range
Compres. (Compression)*
IF Band Width
Area Setting
4
Sirius ID*
* 4
Appears only when SIRIUS Satellite Radio is connected.
Selectable settings, [reference page]
3
Select the signal format emitted through the DIGITAL OUT (optical)
terminal. (☞ also page 61)
PCM : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or when
connecting to a recording device.
Dolby D : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, or MPEG Audio.
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby SR : Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo : Normally select this.
You can enjoy a powerful sound at a low volume level while playing
3
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
Europe : When using in any other areas. FM/AM intervals are set to 50
kHz (100 kHz during auto search)/9 kHz.
SA : When using in South American countries where FM interval is 100
kHz. AM interval is set to 10 kHz.
Your SIRIUS identification number appears on the monitor.
51
Initial:
Underlined
SETTINGS