Using The Sound Control Memory (Scm); Recalling The Sound Modes; Selecting And Storing The Sound Modes - JVC KD-S620 Manual De Instrucciones

Using the Sound Control
Memory (SCM)
You can select and store a preset sound adjustment
suitable to each playback source. (Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see "To cancel Advanced SCM" on page 17.
Select the sound mode you want.
• Each time you press the button, the sound mode
changes as follows.
SCM
• When "SCM LINK" is set to "LINK ON", the
selected sound mode can be stored in memory
for the current source and the effect applies only
to the current source. Each time you change the
playback source, the SCM indicator flashes on
the display.
• When "SCM LINK" is set to "LINK OFF", the
selected sound mode effect applies to any source.
Indication For:
BEAT Rock or disco
music
SOFT Quiet
background
music
POP Light music
SCM OFF (Flat sound)
Preset values
Bass Treble Loudness
+02 00 On
+01 –03 Off
+04 +01 Off
00 00 On

Recalling the sound modes

When "SCM LINK" is set to "LINK ON,"
select the source.
C D
F M
A M
Each time you change the playback
source, the SCM indicator flashes
on the display.
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments" on
page 16.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
pages 14. (Your adjustments will be cancelled if
another source is selected.)
Sound mode
indicator
15