Storing Your Own Sound Adjustments - JVC KD-S620 Manual De Instrucciones

Storing your own sound
adjustment
You can adjust the sound modes (BEAT, SOFT,
POP: see page 15) to your preference and store
your own adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
See page 15 for details.
SCM
2
Select "BAS" (bass) or "TRE" (treble).
To turn ON/OFF the loudness function.
See page 14 for details.
Each time you press LOUD, the loudness
function turns on and off alternatively. (→ go
to step 5)
LOUD
16
3
Adjust the bass or treble level.
See page 14 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the selected sound
mode is stored in memory.
SCM
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on page 15.