JVC KD-ADV5490 Manual De Instrucciones página 40

• Disc cannot be played back.
• Noise is generated.
• Tracks cannot play back as you have intended
them to play.
• Longer readout time is required.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• "NO DISC" appears on the display.
• "NO MAGAZINE" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
• "CALL 1-888-539-SIRIUS TO SUBSCRIBE"
scrolls on the display while listening to the
SIRIUS Satellite radio.
• No sound can be heard. "UPDATING" appears
on the display.
• "NO SIGNAL" appears on the display.
• "NO ANTENNA" or "ANTENNA" appears on the
display.
40
Symptom Remedy/Cause
• Change the disc.
• Record the tracks using a compliant application in
the appropriate discs (see page 6).
• Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or
<.wav> to the file names.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Readout time varies due to the complexity of the
folder/file configuration. Do not use too many
hierarchies and folders.
• Record the audio track using MP3 or Dolby Digital as
the audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused
by how the tracks are recorded.
Insert a disc that contains tracks of appropriate formats.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and
press the reset button of the CD changer.
Reset the unit (see page 3).
Starts subscribing to SIRIUS Satellite radio (see page
23).
The unit is updating the channel information and it
takes a few minutes to complete.
Move to an area where signals are stronger.
Connect the antenna firmly.