Hold" Display - Sartorius M-prove AY303 Manual De Instrucciones

"Hold" Display

Purpose
"Holds" the displayed value; also, the display will be locked for 5 seconds after removing
the sample from the pan.
Example: Determine weight of oversized sample
Step
1. Select application program
2. Select Hold Display
3. Confirm setting
Symbol " " on the display:
application is active
4. If necessary: zero the balance
5. Place oversized sample on balance
6. Start application program
Symbol " " flashes on the display:
the weight value is locked
7. Unload the balance: the weight value
remains displayed for a further 5 seconds; or
8. Zero the balance
9. End the Display Hold application
10. Reactivate Display Hold (if no other
application program has been selected)
11. Repeat procedure starting from Step 5.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Key (or instruction)
(Zero) > 2 sec
(F) repeatedly
(Enter)
(Zero)
(F)
(Zero)
(Enter) > 2 sec
(F)
Display
13 13