OBO Bettermann EX BES Serie Instrucciones De Montaje página 25

Mounting
Risk of cutting!
CAUTION
Sharp edges on the tightening strap.
During mounting, wear protective gloves.
10 mm
Fig. 3: Run the tightening strap through the clamp element.
4. Place the tensioning strap around the pipe and run it beneath the
5
pressure trough through the clamp element .
3 6
Risk of explosion!
WARNING
If there is a lightning strike, contact between the tightening strap and
the contact body can lead to spark formation.
Mount the tightening strap in parallel to the insulating wings and tension
it, so that the tightening strap and contact body do not touch.
5. Tension the tightening strap so that it is hand-tight.
5
6. Tighten the clamping screw so that it is hand-tight.
4
Mounting instructions, strip earthing clamp for Ex areas EN | 25