Mounting The Potential Connection - OBO Bettermann EX BES Serie Instrucciones De Montaje

4.4.2
WARNING
Mounting instructions, strip earthing clamp for Ex areas

Mounting the potential connection

1. Crimp the crimping cable shoe (see „3.3 Accessories" on
page 23) according to the manufacturer's details using the tool
specified by the manufacturer.
Risk of explosion!
If there is a lightning strike, oil, dust, soiling and scratches on the con-
tact surfaces can form sparks.
Before mounting, check the contact surfaces and clean off any soiling.
Fig. 7: Creating the potential connection
2. Mount the crimping cable shoe at the potential connection point
Tightening torque: 20 Nm, WAF 17 mm
Mounting
17 mm
20 Nm
.
8
EN | 29