Descargar Imprimir esta página

Dishware Preparation; Loading The Dishwasher - Bosch SHX46L Manual De Instrucciones

Ocultar thumbs Ver también para SHX46L:

Publicidad

Idiomas disponibles

Idiomas disponibles

0-SJNG YOUR
Dishware
Preparation
!. General
Guidelines
a) Do not pre-wash items having
loosely-attached
soiIing.
b) Remove large food particles, bones,
seeds, toothpicks,
and excessive grease.
c) Items having burned-on or hard,
stuck-on soiIing may require soaking and
hand-scouring.
Loading the Dishwasher
1. General
Guidelines
DISHWASHER
DA!_,_AGE: Loading
the dishwasher
with objects
such as
paper products,
pmastic bags, packing
matedams, or anything
other than
normal
disbware
and kitchenware
could damage the dishwasher.
Do not
load the dishwasher
with anything
other than dishwasher-safe
dishware
and kitchenware.
a) Check the Materials section of this
manuai if you are unsure about an
item's dishwasher
suitability.
b) Load only dishwasher-safe
items
into the dishwasher.
c) Load items so that water can reach
every part of every item.
d) Place pots, pans, cups, bowls, and
glasses
upside-down
in the racks.
e) Separate
items of dissimilar
metals.
2. Loading
the Top Rack
a) Figures 1, 2 and 3 show a typical
mixed load in the top rack.
Figure 1
USING YOUR DJSHWASHEF{
Figure 2
Figure 3
Figure 4
- Flip Tines
FIip Tines foJd down to make loading
the racks easier in some instances.
b) Grasp the tines as shown in Figure
4 and fold the tines downward.
NOTE:
When pushing the top rack into
the dishwasher,
push it until it stops
against the back of the tub. Otherwise,
the top rack spray arm may not connect
to the water supply.
c) When the top rack is loaded, push it
into the dishwasher.
- Top Rack OnJy
TM
Cycb
This cycle allows you to save energy,
water, and detergent by washing loads
small enough to fill only the upper rack.
NOTE:
The Top Rack Only
TM
cycle
does not reduce wash time.
To use the Top Rack Only
TM
cycle,
a} Load the top rack.
b) Press the On/Off button.
c) Press the button for the desired
wash cycle.
d) Press the Top Rack Only button.
3. Loading
the Bottom
Rack
a) Place large items in the bottom
rack. Load pots and pans upside-down.
Figures 5, 6 and 7 show a typical mixed
load in the bottom rack.
Figure 5
y
Figure 6
i t
Figure 7
5

Publicidad

loading