Descargar Imprimir esta página

Setting The Time; Setting The Date; Using The Chronograph - Festina IFMJS05 Manual De Instrucciones

Ocultar thumbs Ver también para IFMJS05:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
I
ENGLISH
INSTRUCTION MANUAL
A)DISPLAYS AND BUTTONS
Stopwatch Minute Hando
Second Hand
Stopwatch Second Hand
24 Hour Hand
Stopwatch Minute Hando
Second Hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
C) SETTING THE DATE
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
D) USING THE CHRONOGRAPH
This stopwatch is able to measure and display time in 1/1 second united up to maximum of 30 minutes.
Stopwatch will stop automatically after running continuously for 30 minutes.
[Measuring time with the stopwatch]
1. Press button " A " to start the chronograph.
2. The stop watch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands return to their Zero positions.
E) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY))
This procedure shoud be performed when the chronograph second hand does not return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button "A" or "B".
3. Once the both hands been zeroed, reset the time and return the crown to its normal position.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
Stopwatch Second Hand
Reset
IFMJS05/15/25
Button A
Normal Position
Button B
Calendar
Stopwatch
Minute Hando
Second Hand
Time Measurement
1st Click Position"
2nd Click Position
24 Hour Hand
24 Hour Hand
Stopwatch Second Hand
Stop

Publicidad

loading

Este manual también es adecuado para:

Ifmjs15Ifmjs25