Logged Data Output To A Pc - LEM HEME ISO 1000 Instrucciones De Uso

Memory (HEME ISO 2000)

7.3. Logged data output to a PC

Data can be downloaded to a PC for further analysis using the
SEND
optional WinLog software and interface (V3 or above).
WinLog is an easy to use PC software and interface package for data
logging applications with the LEM Power Clamps and HEME ISO
Series Insulation testers. The software can be used to continually log
the electrical measurements displayed on the instrument or to
download stored data from the Analyst and ISO2000 to a PC for
further analysis.
•
Easy to use Windows format allowing the display of multiple
parameters in instrument mimic, table and chart formats.
• Simultaneous logging of multiple parameters
• Waveform, Harmonics and stored data download from the Analyst
• Harmonics analysis of waveforms with the Anayst and LH1060
• Simple data export to other applications
Press for more than 2seconds to send all stored values in
SEND
memory to the RS232. It takes approximatly 2 minutes (binary
transfer of internal memory contents ).
The bargraph indicates the progress (0-100%), The symbol DATA
flashes, note the memory is not cleared after sending data.
appears in big display.
- 26 -