HQ-Power VDPL5X5MH Manual Del Usuario página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

000
116
011
000
011
117
073
134
195
000
118
000
052
102
119
153
204
7.3
Art-Net™
Art-Net™ is a protocol for sending video and DMX signals over the Internet.
Art-Net™ configuration requires setting the Art-Net™ network addresses, as well as the DMX personality
and address. The network address information is determined by the design of the control system network.
1.
Set the operating protocol:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <Protocol setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Only ArtNet>. Confirm with ENTER.
2.
Set the IP mode:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <ArtNet setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <IP mode>. Confirm with ENTER.
d.
Press UP or DOWN to select your IP mode. Confirm with ENTER.
3.
Set the network address:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <ArtNet setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Net>. Confirm with ENTER.
d.
Press UP or DOWN to set your network address. Confirm with ENTER.
4.
Set the subnet address:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <ArtNet setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Subnet>. Confirm with ENTER.
d.
Press UP or DOWN to set your subnet address. Confirm with ENTER.
5.
Set the universe address:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <ArtNet setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Universe>. Confirm with ENTER.
d.
Press UP or DOWN to set your universe address. Confirm with ENTER.
6.
Set the start channel:
a.
Press MENU to enter the menu.
b.
Press UP or DOWN to select <ArtNet setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Start channel>. Confirm with ENTER.
d.
Press UP or DOWN to set your start channel. Confirm with ENTER.
Make sure the lighting controller sends DMX signals down the movement channels without
sending them down the pixel-mapping channels.
V. 03 – 18/11/2014
010
strobe
255
010
072
133
show
194
255
255
show speed
051
101
152
dimmer speed
203
255
VDPL5X5MH
no function
from slow to fast
no function
preset pan/tilt movement macro 1
preset pan/tilt movement macro 2
preset pan/tilt movement macro 3
preset pan/tilt movement macro 4
from slow to fast
preset dimmer speed from display menu
dimmer speed mode off
dimmer speed mode 1 (fast)
dimmer speed mode 2 (middle)
dimmer speed mode 3 (slow)
15
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido