Programmed Maintenance; Recommended Brushes - ADIATEK sapphire 70s Manual Del Usuario

GB

PROGRAMMED MAINTENANCE

INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION TANK FILTER CLEANING
BRUSHES CLEANING
BRUSHES DISASSEMBLY AND CLEANING
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
REPLACEMENT SIDE RUBBERS
CHECK SQUEEGEE ADJUSTMENT
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
CHECK BATTERIES ELECTROLYTE
CHECK OF THE BRAKE
TRACTION MOTOR CHECK
BRUSHES MOTOR CHECK
SUCTION MOTOR CHECK
CHECK BRUSHES BASE GROUP
SCREW TIGHTENING
* The hours refer to the ones indicated on the display (see under paragraph "HOUR METER").

RECOMMENDED BRUSHES

Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
MACHINE CODE
sapphire 70s
48906020
48906060
48906080
48906100
sapphire 85s
48906010
48906050
48906070
48906090
48906110
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
Excellent wear resistance, even with hot water over 60°C. It is hygroscopic. It looses its physical characteristics over the time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On irregular floors with deep joints or
relieves, it is recommended to use softer bristles which penetrate more easily and deeper. Please be aware that when brush bristles
are worn out and therefore too small, they become rigid and unable to penetrate and clean deeper. This may also happen with
thicker bristles creating brush vibration.
QUANTITY DESCRIPTION
2 Cylindrical brush PPL 0,7 Ø 150 x 650
2 Cylindrical brush PPL 1 Ø 150 x 650
2 Cylindrical brush TYNEX Ø 150 x 650
2 Cylindrical brush PPL 0,3 Ø 150 x 650
2 Cylindrical brush PPL 0,7 Ø 150 x 800
2 Cylindrical brush PPL 1 Ø 150 x 800
2 Cylindrical brush TYNEX Ø 150 x 800
2 Cylindrical brush PPL 0,3 Ø 150 x 800
2 Cylindrical brush nylon 0,3 Ø 150 x 800
DAILY 20 HOURS *
•
•
•
•
•
•
•
•
•
•
•
USE
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Floors of resistant material and particularly dirty.
Delicate floors.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Floors of resistant material and particularly dirty.
Delicate floors.
Delicate floors.
30
200 HOURS * 1000 HOURS *
•
•
•
•
•
•
•
•
GB