Belkin F5D8633-4 Manual De Usuario página 39

Alternate Setup Method
6. MTU
- Enter the MTU value for your ISP.
7. Disconnect after of x minutes of no activity
enter the number of minute that you want the modem router to auto
disconnect after no activity. After this time has been exceeded, the
connection will be terminated.
Click "Apply Changes" to save and activate your settings. To go
back to the original settings before saving, click "Clear Changes".
Or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless your click "Apply Changes".
Setting your Connection Type to Dynamic/Fixed IP (1483 Bridged)
This connection method bridges your network and ISP's network
together. The Router can obtain an IP address automatically from your
ISP's DHCP server or accept a fixed IP address assigned by your ISP.
For Dynamic IP connection:
1. VPI/VCI
- Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. These identifiers are assigned by
your ISP.
2. Encapsulation
Click "Apply Changes" to save and activate your settings. To go
back to the original settings before saving, click "Clear Changes";
or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless you click "Apply Changes".
- Select LLC or VC MUX your ISP uses.
- Checking the box and
(1)
(2)
(3)
(4)
(5)
(6)
(7)
37 37
1
2
3
4
5
6
7
8
9
10