Amate Audio KEY Serie Manual De Usuario página 11

KEY Active systems
It is advisable to locate the subwoofer units on the floor as they can take advantage
of the so-called "floor-effect", thus increasing the response in the low frequencies.
If possible, place the subwoofers under the same acoustic axis used for the
satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
3.2. Tripod use
The KEY10A, KEY12A, KEY15A and
KEY15NA models are equipped with a
tripod socket (A) for use with a standard
35mm tripod.
Do not use the tripod on non-flat floors
and be careful not to raise the cabinet
too high on the tripod, as it may become
unstable.
Fig.4. Full range cabinet with tripod
3.3. Full range cabinet with subwoofer
Fig.5. Full range cabinet with subwoofer
3.4. Live applications (mobile)
For a mobile application, whether it is an
outdoor or indoor installation, the common
location is to place the bass units (one or two
per channel) on each side of the stage.
Fig.6. Mobile applications
11
The KEY18WA is equipped with a
M20 Plate for a 35mm distance
rod. You can use it to place over
the subwoofer the models that are
equipped with the tripod socket
(KEY10A, KEY12A, KEY15A and
KEY15NA). Be careful not to use
this system on non-flat surfaces as
it may become unstable.
Sep 2018
Amate Audio