Amate Audio KEY Serie Manual De Usuario página 16

KEY Active systems
A
B
A: Current preset
B: Input and Output levels
C: Gain level
D: Temperature of the power stage
E: Special features
- Eco: when Ecomode is enabled
- Lock: shows when the keypad is locked
- Polarity: positive (Pol+) or negative (Pol-) (only in Subwoofers)
4.2 Selecting a Preset
To change the Preset, follow these steps:
1) If the keypad is locked, unlock it with
MENU + SELECT
2) Press PRESET once. You will enter the
Preset menu, and the current preset will be
shown
3) Press PRESET to browse through the available presets of the system. When you
find the desired one, press SELECT to set it as the current preset. You will be
redirected to the main screen
4.3 Gain setting
In order to change the gain, first unlock the
keypad with MUTE + SELECT and then
press UP or DOWN. Then you will enter the
gain setting screen.
The Gain can be adjusted between 0dB and -
20dB. When -20dB level is reached, and the
DOWN key is further pressed, the system will mute and this will be shown in the
screen. To unmute the system, press the UP key at least once.
To accept the gain setting and go back to the main screen, press SELECT. Should
this not happen after 30 seconds, the system will automatically switch to the main
screen.
16
FLAT
Fig. 14: Main screen display
C
0.0dB
30
D
Eco
Lock
E
FLAT
Gain
-9.5dB
Sep 2018
Amate Audio