Publicidad
Idiomas disponibles
Idiomas disponibles
Operating
the Dishwasher
Selecting
the
Proper
Wash
Cycle
Always
make sure your dishware
is dishwasher
safe. Refer to the Dishware
Materials
section
of this manual
for guidance.
ATTENTION
To avoid damage
to delicate
or heirloom
items,
do not wash them
in your dishwasher.
Wash
Cycles
Wash cycles accessible
from this menu
include:
Heavy Wash
Cleans items having
baked-on
or hard dried-on
food
soils. These items may require
soaking
or hand scouring.
Sens-a-Wash
(Models
DWHD64C,
DWHD64E)
Takes the guesswork
out of cycle selection.
The sensors
in the dishwasher
automatically
adjust the cycle length,
temperature
and water
changes
based on the soil load.
Normal
Wash
Cleans large loads with
loosely
attached
food soils.
Light
Wash (Models
DWHD64C,
DWHD64E)
Cleans delicate
or heirloom
dishware
and silverware,
or other
special items.
Hand washing
may be the best for such items.
Quick
Wash
Cleans lightly
soiled
dishes and reduces
overall
wash time.
Use this cycle to clean glasses
and desert
dishes that may need to be re-used
at the same event.
Rinse Only
Allows
you to rinse the food
soil off of a partial
load and hold them
in the dishwasher
until
there
is a full load.
More information
on dishwasher
cycles is located
in the Wash Cycle Information
section
of
this manual.
Wash
Cycle
Options
PowerBoost
Cycle Time Optimizer
(Models
DWHD64C,
DWHD64E)
Reduces the time to complete
a wash cycle by preheating.
To activate,
select the Power-
Boost button
in addition
to the desired cycle.
Additional
Drying
Heat (Models
DWHD64C,
DWHD64E)
With this option
you can raise the temperature
of the rinse water
and increase
the drying
time which
will result in improved
drying.
To activate:
Press and hold the left "Cancel
Drain" button,
then
press and hold the On/Off
button.
When the LED display shows a "00" or a "01" release both buttons.
To enable
the Additional
Drying
Heat, press the left "Cancel
Drain" button
until the
LED display shows
a "01".
To disable
the Additional
Drying
Heat, press the left "Cancel
Drain"
button
until the
LED display shows
a "00".
Press the On/Off
button
to save the setting.
Delay Start (Models
DWHD64C,
DWHD64E)
This option
allows
you to delay the start time
of your dishwasher.
To activate:
• Turn the dishwasher
on.
• Select the desired
wash cycle.
• Press and hold the Delay Start button.
Release when
the desired delay time
is shown
in the display window.
12
Publicidad
