o Wipethe doorsealwith clear
wateronlyandthenwipe dry
thoroughly.
o Cleanthe surfaceof the
appliance witha softdampcloth
anda littlewashing-upliquid.
Afterwards, r ubdry.
o Aftercleaning: r econnect a nd
switchonthe appliance
Cleaning the humidity
filter
Cleaning the ice cube
container
If ice cubes have not been
dispensed
for a prolonged
period,
they will shrink, have a stale taste
and stick together.
o
Pull out the container,
empty
and clean with lukewarm
water.
o
Thoroughly
drythe
container
and screw conveyor
to prevent
new ice cubes from sticking.
Inserting the ice cube container:
o
Push the ice cube container all
the way back onto the supports
until it locks into position.
o
If the container
cannot be
pushed all the way back, twist
the screw conveyor
in the
container.
Ice cube production
continues.
Cleaning
the water
collecting
tray
Spilled water collects in the water
collecting
tray.
To empty and clean, remove the
filter. Wipe out water collecting
tray
with a sponge or absorbent
cloth.
Light
(depending
on model)
LED light
Your appliance
features
a maintenance-free
LED light.
Class 1M laser lighting (IEC 60825).
To avoid risk of eye injury, do not
look directly into the lighting with
optical instruments!
These lights may be repaired by
customer service or authorised
technicians only.
Changing
the bulbs in
the refrigerator
and
freezer compartments
Risk of electric
shock!
To avoid electrical shock which
can cause death or severe
personal injury, disconnect
power to appliance
before
making repairs.
After making repairs, reconnect
power.
A full-filled ice cube container
is
very heavy. To avoid
risk of
injury, use caution when removing
the ice cube container!
24