brennenstuhl BR 5232 Manual De Instrucciones página 21

052109 Rauchmelder BR 5232 02.06.2009 19:19 Uhr
BR 5232 Operating Instructions
Installation and set-up of smoke alarm
NOTE: The enclosed mounting equipment is
suitable for concrete slabs. For other subsurfaces,
suitable mounting equipment should be purchased
from a specialty shop.
NOTE: An alarm can simply be stopped by
removing the battery from the battery clip.
The smoke alarm is powered by a battery and
needs no other electical power supply.
Mute function
Press the test-/mute function button in order to
turn off a false alarm. The device will be automa-
tically adjusted to a lower level of sensitivity. This
allows false alarms to be suppressed for a period
of about 10 minutes, i.e. the device is muted.
After the mute period expires, the device automa-
tically returns to normal sensitivity. If you want to
prolong the mute, just press the test/mute button
again.
Networking
This smoke detector can be coupled to other
Brennenstuhl BR 5232 units. The networking
capability consists in connecting up to 12 smoke
detectors using the white cable.
21