Descargar Imprimir esta página

Danby Designer Ice'n Easy DIM1524W Manual Del Usuario página 11

Ocultar thumbs Ver también para Ice'n Easy DIM1524W:

Publicidad

Idiomas disponibles

Idiomas disponibles

Allow the ice maker door to
remain open for a few min-
utes after the ice making mak-
ing process is complete, run-
ning the self-clean mode or
manual cleaning, to air out and
dry the inside of the ice maker
cabinet
NOTE: Be certain the
power is off before
cleaning
any part of
this appliance,
:Neve r use any commercial:
i clearters on any part of your
ice maker.
:_:::: ::: :_
::i: i
Please refer to the Self-Clean
Mode Section on pg 8 for
proper system cleaning
Walls, Floor of Reservoir,
Inside Window,
and Plastic
Parts
Some water deposits and dust
can be removed with a paper
towel, others may require a
damp cloth,
Ice Bucket
To prevent breakage, do not
place the ice bucket into hot
water just after ice making..
Wash it carefully in warm,
sudsy water. The ice bucket
can be broken if dropped
Remember, do not operate the
ice maker without the ice
bucket in place
Do not use abrasive cleaners
or sharp utensils on any part of
your ice maker.
Do not use cleaners con-
taining ammonia or alcohol
on the ice maker,
Ammonia
or alcohol can
damage the appearance of
the appliance.
Outer Case
Clean the outside of the appli-
ance with a sudsy cloth, Rinse
and then dry, Wipe the window
clean with a damp cloth,,
Control Panel and
Door
Wipe with a damp cloth.. Dry
thoroughly Do not use clean-
ing sprays, large amounts of
soap and water, abrasive or
sharp objects on the panel-
they can damage it.. Some
paper towels can also scratch
the control panel.
Door surface
It's important to keep the area
clean where the door seals
against the cabinet, Use only
mild, non-abrasive detergents
applied with a clean sponge or
soft cloth. Rinse well
10

Publicidad

loading