Ice Making; Ice Size Selection; Delayed Start - Danby Designer Ice'n Easy DIM1524W Manual Del Usuario

f
F]oFIH
@
1. Electronic Display - shows
timer setting, selection indicators,
and status icons
2. Power Button - used to turn
unit on or off, also used to cancel
the timer and/or currently running
program
3. Ice Size Selector - Allows
you to select between three (3)
available ice sizes
4. Increase Button - Used in
conjunction with the timer feature,
each depression adds 5 hours to
the set timer
5. Decrease Button - Used in
conjunction with the timer feature,
each depression removes 5 hours
from the set timer
• Small Cube -Denotes that "_"
U the ice maker is currently set
L_J
to produces small size cubes
U
o Medium Cube - Denotes
that the ice maker is currently
set to produce medium size _
o
cubes
° Large Cube - denotes that
the ice maker is currently set
to produce large size cubes
B_] RF"Timer - Displays the
.... delayed
start set time
o Power - This icon flashes
when the power is off and
becomes static when the unit
has been powered on
, Bucket Full - Illuminates
to indicate that the water
bucket is full and will need to
be emptied before the ice
making process can resume
• Add Water - illuminates
when the internal reservoir
requires filling before pro-
ceeding or continuing with
the current selected program,
o Fault - displayed when
the unit has entered a fault
mode and is not able to begin
or resume the current mode
Please refer to page 11 for
instructions should this situa-
tion occur.,
o Pump - Illuminates when
_the unit is pumping water
from the internal reservoir to
the water bucket during the
ice making cycle and the self
clean mode,
6