Service Information; Troubleshooting - Black and Decker GH3000 Manual De Instrucciones

Problem
• Unit will not start.
TROUBLESHOOTING
PossJbJe Cause Possible Solution
• Cord not plugged in. • Plug appliance into a working outlet.
• Circuit fuse is blown. • Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a Black & Decker
service center or authorized servicer.)
• Circuit breaker is tripped. • Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to
trip discontinue use immediately and
have t serv ced at a B ack & Decker
service center or authorized servicer.)
• Cord or switch is • Have cord or switch replaced at Black
damaged. & Decker Service Center or Authorized
Servicer
• Ensure edging wheel is on the edge of
the surface and the cutting line is positioned
in the grass or dirt area to be edged not
the sidewalk or other abrasive surface.
• Cutting line is consumed • Edging too far from
quickly in edge mode. edge of sidewalks or
abrasive surfaces. The
cutting line is hitting the
sidewalk or abrasive surface.
For assistance with your product, visit our website www.blackanddecker.com for the location of
the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.
MAINTENANCE
z_WARNING:
Disconnect the plug from the power source before performing any maintenance.
z_OAUT_ON: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
1. Keep the air intake slots clean to avoid overheating.
2. Your trimmer line can dry out over time. To keep your line in top condition, store spare pre-
wound spools or bulk line in a plastic, sealable bag with a tablespoon of water.
3. Plastic parts may be cleaned by using a mild soap and a damp rag.
4. The line cutter on the edge of tlfle guard can dull over time. It is recommended you
periodically touch-up the sharpness of the blade with a file.
SERVICE INFORMATION
All Black & Decker Service Oenters are staffed with trained personnel to provide customers with efficient
and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement
parts, contact the Black & Decker location nearest you. To find your local service location, refer to the
yellow page directory under "Tools-Electric" or call: 1-800-544-6986 or visit www.bJackanddecker.com
FULL TWO=YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or
workmanship. The defective product will be replaced or repairedat no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided that the store is a participating retailer). Returns should be made within the time
period of the retailer's policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase
may be required. Please check with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to
a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof
of purchase may be required. Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory. This warranty does not apply to accessories.
This warranty gives you specific legal rights and you may have other rights which vary from state to
state or provnce to province. Should you have any questions, contact the manager of your nearest
Black & Decker Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products
sold in Latin America, check country specific warranty information contained in the packaging, call
the local company or see the webs_te for warranty information.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See 'Tools=Electric'
- Yellow Pages -
for Service & Sales