English - Manutan VARIOfit Instrucciones De Servicio Generales











t

To ensure the stability of the truck, always move it slowly and
smoothly without jerking.
The truck is designed for internal transport on firm and level floors
within the factory site. Do not use the truck on sloping surfaces
because of the possibility of overloading and/or losing control.
Never move a loaded truck over thresholds, kerbs etc., as there is a
risk of its tipping over.
Do not move loaded trucks on a surface with a gradient exceeding 2%
(1 in 50).
The truck must not be permanently exposed to the weather,
especially damp and wet conditions.
The size of the load must not exceed the dimensions of the load
surface.
Do not use the truck to transport people.
Do not use the truck if there is a risk of exceeding its carrying
capacity.
Do not use motorised vehicles to move the truck.
Always wear protective gloves when working with the truck.
When transporting loads, make sure there is a safety margin of at
least 600 mm between people and the truck.
9
9