Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR SAW
READ THIS
INSTRUCTION
MANUAL
AND
SAFETY
RULES
BEFORE
OPERATING
YOUR
CHAIN SAW.
Compare the illustrations with your unit to familiarize yourself with the location of the
various controls and adjustments.
Save this manual for future reference.
Chain Adjustment
Front Hand Guard
Tool
\
r_
(Bar Tool)
"_ II_
Muffler
_
Chain
"'_" _L_
L
Bar Sprocket
Bar Oil _
_--T,.,_._,
Hole
Flit Cap
Front Handle
r/
Starter Rope
_,_/_
ON/STOP
/
Switch
Fuel Mix Fill Cap
Starter Housing
Throttle
Lock-out
Rear
Handle
Cylinder
Cover
Adjusting
Direction
of Chain
Travet
Throttle
Trigger
Chain Brake
Choke/Fast
Idle Lever
ON/STOP
SWITCH
The ON/STOP
SWITCH
is used to stop the
engine.
THROTTLE
TRIGGER
The THROTTLE
TRIGGER
controls engine
speed.
THROTTLE
LOCK-OUT
The
THROTTLE
LOCK-OUT
must
be
pressed
before you can squeeze
the throttle
trigger. This feature prevents
you from acci-
dentally
squeezing
the trigger.
CHOKE/FAST
IDLE
LEVER
The choke and fast idle speed are set by pull-
ing the CHOKE/FAST
IDLE LEVER out fully
for cold starting or after refueling,
The choke
provides
additional
fuel to the engine during
cold starting.
Guide Bar
Chain Brake Nuts
CHAIN
BRAKE
The CHAIN
BRAKE
is a device designed
to
stop the chain if kickback
occurs.
The chain
brake activates
automatically
in the event of
kickback.
The chain brake activates
manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged
by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN
TENSION
it is normal for a new chain to stretch during
first
30 minutes
of operation.
You should
check
your
chain
tension
frequently.
See
CHAIN
TENSION
in the ASSEMBLY
sec-
tion.
_lk WARNING:
Muffler is very hot dur-
ing and after use. Do not touch the muffler or
allow
combustible
material
such
as
dry
grass or fuel to do so.
Publicidad
