Product Description; Operation - Zanussi ZES3921 Manual De Instrucciones

Kitchen unit with oven
The hob recess dimensions must obey the indi-
cation and the kitchen unit must be equipped
with vents to let a continuous supply of air. The
electrical connection of the hob and the oven

Product description

Cooking surface layout
Electric cooking zones control knobs
Symbol
0

Operation

To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
14
1
180
mm
145 2
mm
3
4
Function
off position
must be installed separately for safety reasons
and to let easy remove oven from the unit.
50 cm
360 cm
Rear cooking zone 1700 W
1
Front cooking zone 1200 W
2
Power indicator
3
Control knobs
4
Symbol
1
6
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
When a cooking zone operates, it hums
for a short time. This is typical of all ceram-
ic glass cooking zones and does not show that
the appliance operates incorrectly.
2
120 cm
180 cm 2
2
Function
minimum heat
maximum heat
www.zanussi.com
2