9- Operating Instructions; Selection Of The Operation Mode; Automatic Mode (Auto); Cooling Mode (Cool) - Saunier Duval SDH 31-026 NW Manual De Usuario

9- OPERATING INSTRUCTIONS

9.1 SELECTION OF THE OPERATION MODE

Press the ON/OFF button on the remote controller pointing at the unit. press the MODE button to select the
needed mode: auto, cool, dry, heat or fan.

9.2- AUTOMATIC MODE (AUTO)

In automatic mode (AUTO) the air conditioning unit automatically selects the cooling (COOL) or heating (HEAT)
mode in accordance with the actual ambient temperature.
In order to activate:
With the unit connected
Press the MODE button.
Select the automatic operation mode (AUTO)
In AUTO mode it is not possible to modify the temperature, which remains set at 25ºC
- Whilst AUTO remains selected, the air conditioning unit enters into a single mode and cannot change to
another one

9.3 COOLING MODE (COOL)

In cooling mode (COOL), the air conditioning unit only allows cooling.
In order to activate:
With the unit connected
Press the MODE button.
Select the cooling operation mode (COOL).
Press the + - buttons to select the temperature setting.
Press the FAN SPEED button to select the fan speed.
- Each time the FAN SPEED button is pressed, the fan speed will be modified, increasing its power.

9.4 DEHUMIDIFYING MODE (DRY)

In dehumidifying mode (DRY), the air conditioning unit operates by removing the humidity from the
atmosphere.
In order to activate:
With the unit connected:
Press the MODE button.
Select the dehumidifying mode (DRY).
In DRY mode it is not possible to modify the temperature, which remains set at 25ºC, nor the fan speed,
which remains set at Low.
8