Product Features; Noise/Vibration Information - Bosch GKS 600 Professional Manual Original

OBJ_BUCH-2756-002.book Page 15 Wednesday, August 31, 2016 4:02 PM
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
(3 601 FA9 00.)
2 Lock-on button for On/Off switch
(3 601 FA9 0K./3 601 FA9 0L.)
3 Spindle lock button
4 Scale for mitre angle
5 Wing bolt for bevel-angle preselection
6 Wing bolt for parallel guide
7 Cutting mark, 45°
8 Cutting mark, 0°
9 Parallel guide
10 Retracting blade guard
11 Base plate
12 Lever for retracting blade guard
13 Chip ejector
14 Blade guard
15 Handle (insulated gripping surface)
16 Motor housing (insulated gripping surface)
17 Hex key
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Auxiliary handle (insulated gripping surface)*
24 Auxiliary-handle holder*
25 Locking screw for auxiliary-handle holder*
26 Extraction adapter*
27 Fastening screw for extraction adapter*
28 Clamping lever for cutting-depth preselection
29 Cutting-depth scale
30 Set of screw clamps**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
Bosch Power Tools
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
max. cutting depth with saw blade
diameter 165 mm
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Mounting bore
Weight according to EPTA-
Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-5:
2
Cutting wood: a < 2.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 15
GKS 600
3 601 FA9 0..
W 1200
-1
min 5200
mm 55
mm 37

mm 235 x 138
mm 165
mm 160
mm 2.2
mm 20
kg 3.6
/ II
2
1 609 92A 3BP | (31.8.16)