Control Functions - Classic Flame 36EB110-GRT Manual De Instrucciones

Ocultar thumbs Ver también para 36EB110-GRT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The builders box can be operated by the wall mounted control box or remote control.
Note:
Make sure the Main Power Switch is in the ON position
to operate the unit (Figure 3).
POWER
The power button will put the insert in standby mode. This will
turn off all functions and hold the settings in memory; pressing
the button again will turn on the unit to the previous setting.
COLOR (FLAME)
Changes the flame effect color. There are 3 color setting avaiable:
orange, blue, orange and blue.
LEVEL (FLAME)
Changes the brightness of the flame effect. There are 5 brightness
levels you can cycle through and the OFF setting.
UP (FLAME)
(For model 36EB110-GRT & 36EB220-GRT)
Increases the flame intensity. There are 5 brightness levels and
OFF.
DOWN (FLAME)
(For model 36EB110-GRT & 36EB220-GRT)
Decreases the flame intensity. There are 5 brightness levels
and OFF.
HEAT
Turns the heater on and off. The LED indicator light besides the
heat button will light up when on.
NOTE
: Holding the POWER button on the control panel for
10 second will disable the heater function. To re-enable the heater
press and the hold the POWER button for 10 seconds.
TEMPERATURE DISPLAY
Displays the current ambient temperature, operational
range 60℉- 90℉.
TIMER
There are 10 timer setting (OFF -30 minutes - 1 hour - 2H-3H-4H-
5H-6H-7H-8H-9H) pressing the timer button will cycle through
the settings.
UP (LIGHT EFFECTS)
Pressing this button will change the uplight between the 6 settings:
white, red, green/red/green/blue, green/blue, white/blue/red,
blue and OFF.
DOWN (LIGHT EFFECTS)
Pressing this button will change the downlight between 6 settings:
white, red, green/red/green/blue, green/blue, white/blue/red,
blue and OFF.
AUTO (LIGHT EFFECTS)
Turns on/off automatic cycling for the downlights and uplights.
EMBERS
Turns on/off undulating emberbed effect.
THERMOSTAT
The themostat sets the heater cut off level.
OPERATION

CONTROL FUNCTIONS

E-4
Figure 3
Figure 4
Model #: 36EB111-GRC & 36EB221-GRC
LEVEL
COLOR
FLAME
TIMRER
DOWN
UP
LIGHT EFFECTS
Figure 5
Model #: 36EB110-GRT & 36EB220-GRT
DOWN
UP
FLAME
TIMRER

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

36eb111-grc36eb220-grt36eb221-grc

Tabla de contenido