Magnet Adjustment - Cole-Parmer Techne MCS-102L Manual Del Usuario

Magnet Adjustment

Each of the MCS platforms may be used with two or more sizes
•
of culture vessel, except the MCS-104XL which is set for 5 litre
vessels only.
The position of the units magnet(s) must be adjusted for the
•
particular vessel being used to give the optimum stirring action.
MCS-102L, MCS-104L and MCS-104S units have their magnets
•
set for 500 ml vessels when they leave Techne.
Remove screws from the sides of the unit. Unscrew the location
•
bosses.
Remove the cover and position the magnets as follows:
•
Remove the screw holding the magnet to the pulley.
•
Position the magnet on the appropriate peg as shown in the
•
table.
Position
Peg A
Peg B
Peg C
Magnets must be mounted with their blue spots (south poles)
•
leading.
Replace the screw to hold the magnet to the pulley.
•
Replace the cover and fit the appropriate location bosses.
•
The location boss for 1 litre vessels is supplied with the flask.
•
500 ml, 250 ml and 125ml flasks use the same location boss,
•
as supplied with the platform.
Vessel Size
500 ml
1 litre
125/250 ml
18