Battery LED Warning Codes
System errors and warnings can be indicated by various ligh ng pa erns on the ba ery's power panel.
If any issues persist a er the sugges
Communica on error with
the bicycle system
If the temperature exceeds
the guaranteed opera ng
range, the b
shut o
This is displayed if a genuine
drive unit is not connected
or if any of the cables are
disconnected
This is displayed if there is an
error during charging
Electrical failure inside the
www.pivotcycles.com
s below, contact the place of purchase.
ry output is
ery
service-eu@pivotcycles.com
TROUBLESHOOTING
Make sure the b
loose or improperly connected.
Leave the ba ery in a cool place
away from direct sunlight un l the
internal temperature of the
decreases su ciently.
Connect a genuine ba ery and
drive unit. Check the condi on of
the cables.
Remove the charger from the bat-
tery and press the power bu on. If
an error appears, contact the place
of purchase.
Connect the charger to the bat-
tery and then remove the charger.
Press the power bu on with only
the ba ery connected.
*
: No Light
: Lit Up
+49 711 4905 9800
ry cable is not
ery
: Blinking
11