Operating Mode; Safety Devices; Emergency Exit; Technical Specifications - entrematic SPRINT PN Manual Para El Usuario

4. Operating mode

The automatic system for Entrematic swing doors works electronically.
The motor, the control unit, any batteries are all assembled inside a specific aluminium
box.
When an opening pulse (for instance from a movement sensor) is received by the control
unit, the motor starts up and conveys the movement to the arm that opens the door .
Closure is automatic once the "opening time" has lapsed and the control unit has re-
ceived no opening or stop command.
In some cases, closure can be forced via a manual command.
The operating modes are various: Low Energy, Push and Go, Power assist, etc.
The user can choose the type of door operation by means of the function selector switch.

4.1 Safety devices

To ensure safe transit during closing operations, the door reverses its movement di-
rection if it meets an obstacle. At the following operation, the door resumes the inter-
rupted movement at low speed to verify that the obstacle has been removed.
If an obstacle is detected during the opening operation, the door wings stop immedi-
ately and then close after a set delay time.
It is possible to monitor the area of the door movement with motion sensors in order
to detect any obstacles.

4.2 Emergency exit

The automations for the swing doors can be installed in escape routes.
5. Technical specifications
Manufacturer: Entrematic Group AB
Address: Lodjursgatan 10, SE-261 44 Landskrona, Sweden
SPRINT PN
Type: SPRINT P
SPRINT V
Power 230V~
supply: 50/60 Hz
Power con-
max 120W
sumption:
Protection
IP30
class:
Certifications of third parties, supplied by accredited certification bodies and
Certifications:
valid for usage safety. Refer to the Conformity Declaration.
SPRINT LN DAB105
SPRINT L
SPRINT LV
24V 100-240 V~ +10
(external fuse) /-15% 50/60 Hz
max 120W max 75W
IP30 IP20
20
DAB205
100-240 V~ +10
/-15% 50/60 Hz
max 300W
IP20