Operation - Diehl Metering Sharky 775 Instrucciones De Montaje

Information loop (3)
Sequence Window 1
3.1 Actual date
3.2 "Sec_Adr"
3.3 "Pri_Adr 1"
3.4 "Pri_Adr 2"
3.5 "coldPIPE" * (installation location)
3.6 "Port 1"
3.7 "Port 2"
3.8 "UHF ON" (status of integrated radio)
3.9 Software version
Module type
No Module
MBus
RS232
RS485
Pulse in
Pulse out
Pulse loop (4)
Sequence Window 1
4.1 Pulse input 1
4.2 Pulse input 2
4.3 Pulse output 1
4.4 Pulse output 2
Tariff loop (5)
1
Month loop (6)
Sequence Window 1
6.1 "LOG"
6.2 "LOG"
: :
6.24 "LOG"
* Example Only for heat meters with activated cooling tariff
1
9.

Operation

Use the push button to page through the individual displays. When doing
so a differentiation is made between short and long button presses. With a
short button press (<3 seconds) you get to the next display within a loop;
with a long button press (>3 seconds) you get to the next display loop.
The "Energy" window (sequence 1.1) of the main loop is the basic display.
If the button is not pressed for approx.4 minutes, the meter automatically
switches off the display to save power (exception: an error exists). If you
press the button again, the meter returns to the basic display.
-32-
Index
0
1
2
3
4
5
Window 2
Cumulative value pulse
input 1
Cumulative value pulse
input 2
Pulse weighting pulse output 1
Pulse weighting pulse output 2
Window 2
Date
Date-1
:
Date
English
Window 2
Time
Secondary address
Primary address 1
Primary address 2
(Module type)
0* (no. of the plugged in module at
port 1)
1* (no. of the plugged in module at
port 2)
Check sum
Module type
Analog out
Pulse in out
Test cable energy
Test cable volume
External radio
Window 3
Pulse value
Pulse value
Window 3
Energy
Energy
:
Energy
Index
6
7
9
10
18
Window 4
max. flow
max. flow
:
max. flow