Terresterial Tv Search Table; Terresterial Tv Channel List - 3B Elettronica 8110-AIR5 Manual Del Usuario

SEARCH TABLE MENU:
IT uses the channel scan function in order to test the order and gain of T/T2 system rapidly. You can select the step
range and the end frequencies and scan all the signals within the band at one of the bandwidths of 6, 7, 8 MHz. There
may be amplifiers at terrestrial TV antennas, you might need to select a supply voltage of 5V, 12V, 20V in this case .
A table similar to the figure above will appear after you have scanned the band you have selected. When you go on a
frequency in this table an click on OK, then you can measure this channel in real time. You can download the signal
parameters on a USB memory card when you press on the EDIT button.
CHANNEL LIST:
You can display the CHANNEL LIST from the MAIN MENU while watching any channel or watch later any channel you
want to by pressing on the ENTER button.
Rev.0 0.2019 Tel.039616417 info@3belettronica.com www.3belettronica.com
66