3B Elettronica 8110-AIR5 Manual Del Usuario página 69

FILL / LINE: You can see the levels in the Spectrum screen as full or in line.
CAPTURE FUNCTIONS: You can save your measurement with the SAVE CAPTURE feature at the time of measuring the
Spectrum, and then use the LOAD CAPTURE function to recall and use it as a reference.
SAVE TO USB: You can save the measured values in the Spectrum display as a * .CSV table on your USB display.
GSM900 SPECTRUM 900mHz Band :
Select GSM900 SPECTRUM for measurement of 900mHz band and press OK button. Make sure that the meter is
connected to a suitable antenna on the 900mHz band.
In the above ranges of the GSM900 Spectrum display, you can see the Downlink signals of the GSM operators. Move
the red marker with the right and left buttons to measure the signal levels. You can complete the measurement after
capturing the cleanest and highest signal level in the entire band of the spectrum measurement.
LEVEL BUTTON: In this screen, once you press the LEVEL button, the C / N value will be displayed.
MENU BUTTON: When you press the MENU button on the SPECTRUM ANALYSIS screen, you can easily perform
measurements with the on-screen functions.
Rev.0 0.2019
EDIT BUTTON: SPECTRUM ANALYSIS screen, you can manually change your measured
values by pressing EDIT.
IF FREQ: You can see the frequency on which the marker is on.
SPAN: You can select the frequency range you want on the screen.
REF .: You can select the highest measuring point.
RANGE: You can select the signal level range you want to measure.
Tel.039616417 info@3belettronica.com
69
www.3belettronica.com