3B Elettronica 8110-AIR5 Manual Del Usuario página 72

UMTS2100 SPECTRUM 2100mHz Band :
Select UMTS 2100 SPECTRUM for measurement of 2100 mHz band and press OK button. Make sure the meter is
connected to a suitable antenna on the 2100mHz band.
In the above ranges of the UMTS2100 Spectrum display, you can see the Downlink signals of the GSM operators. Move
the red marker with the right and left buttons to measure the signal levels. You can complete the measurement after
capturing the cleanest and highest signal level in the entire band of the spectrum measurement.
LEVEL BUTTON: In this screen, once you press the LEVEL button, the C / N value will be displayed.
MENU BUTTON: When you press the MENU button on the SPECTRUM ANALYSIS screen, you can easily perform
measurements with the on-screen functions.
AUTO RANGE: Automatically determines the measuring range according to the highest and lowest signal level on the
Spectrum screen.
FILL / LINE: You can see the levels in the Spectrum screen as full or in line.
CAPTURE FUNCTIONS: You can save your measurement with the SAVE CAPTURE feature at the time of measuring the
Spectrum, and then use the LOAD CAPTURE function to recall and use it as a reference.
SAVE TO USB: You can save the measured values in the Spectrum display as a * .CSV table on your USB display.
Rev.0 0.2019 Tel.039616417 info@3belettronica.com www.3belettronica.com
72