Corsair HX1000W Manual Del Usuario página 7

Congratulations! You have completed installation of the HX1000W power supply
and your system is ready to go!
Step B: Replacing your existing power supply
Disconnect the AC power cord from your wall outlet or UPS from the existing power
supply. Disconnect all the power cables from your video card, motherboard and all
the other peripheral devices. Follow the direction in your chassis manual and
uninstall your existing power supply. Go to Step A.
Safety and Agency Approvals
CE EN55022:1998/A1:2000/A2:2003 CLASS B EN 61000-3-2:2000,
EN 61000-3-3:1995/A1:2001 EN55024:1998/A1:2001/A2:2003
FCC FCC Part 15 & Part 2 (CISPR 22 CLASS B)
C-TICK AS/NZS CISPR 22:2002 CLASS B
UL UL 60950-1
CSA CSA C22.2 NO. 60950-1
TUV EN 60950-1
CB IEC 60950-1
■ Due to high voltages inside the power supply, under no circumstances should the
WARNINGS
■ Please operate the power supply in a safe and dry environment.
power supply cover be removed. The warranty will be void if the cover is removed.
■ Do not insert any objects into the open ventilation or fan grill area of the power supply.
■ Please use ONLY genuine Corsair modular cables with Corsair HX1000W Series Power
Supply. Third party cables might not be compatible and could cause serious damage to
■ The 24-pin main power connector has a detachable 4-pin connector. This 4-pin connector
your system and power supply. The warranty is voided with the use of third party cables.
is not a P4 or ATX 12V connector. Please DO NOT force this cable in the P4 or ATX +12V
■ For indoor use only.
socket on the motherboard.
7